郑州巴特_专业的熔体泵、齿轮泵、计量泵生产厂家。

  • 服务热线
    0371-67993077
  • 图文传真
    0371-67993277
  • 在线服务
    点击这里给我发消息
  • 扫描二维码,点击可扫描大图
当前位置:熔体泵首页 >技术支持 > 熔体泵知识 > >巴特熔体泵正文

熔体泵、齿轮泵概述

发布日期:2013-11-02 08:34:23来源:郑州巴特计量泵

  熔体泵概述 General Information

  熔体泵主要用于高温高粘度聚合物熔体的输送、增压、计量。容体泵将来自挤出机的高温塑料熔体增压。稳压后流量稳定地送入挤出机头。其稳定熔体压力、流量的能力优于各种类型的挤出机。国外广泛应用于塑料、树脂、橡胶制品的挤出成型。如:造粒、薄膜、管材、板材、片材等行业。随着机械工业的日益发展,熔体泵在国内市场也逐渐地被行业人士所采纳、应用。

  Melt pump is mainly used in high temperature and high viscosity polymer melt transportation, pressurization, metering. The melt pump pressurizes and stabilizes pressure of hot melt polymers coming from the extruder, then send them into extruder dies. The pump's ability of stabilizing the pressure and flow is better than all kinds of extruders. Foreign countries widely apply in plastic, resin, rubber extrusion, such as pelletizing, film, pipes, plate, etc. With the increasing development of mechanical industries, melt pump is increasingly accepted and applied by domestic.

  双曲线齿形设计Hyperbolic tooth shape design

  压力脉动率更低 Lower pressure pulsation rate

  防止剪切热产生Preventing shear heat

  非接触免维护 Non-contact Free maintenance

  螺旋密封设计Helical sealing design

  无后顾之忧Free from any worries

  先进的流道设计Advanced flow design

  熔体停留时间短 Short residence time of melt stream

  适用热敏性材料Suitable for heat-sensitive material

  专业辅助设计软件 Professional auxiliary software design

  优化轴承润滑设计 Advanced bear lubrication design

  有效延长使用寿命 Prolonging the service life